Victron Orion Smart 30A 12V DC to 12V DC non-isolated battery-to-battery charger with Bluetooth

  

Delivery available

Victron Orion Smart 30A 12V DC to 12V DC non-isolated battery-to-battery charger for with Bluetooth connectivity

  • Charges 12V leisure batteries from starter batteries while driving, with adaptive 3-stage algorithm for lead-acid or lithium.
  • Bluetooth app control for monitoring and settings – suits vans, trucks, or site generators.
  • Smart alternator compatible with engine-run detection to protect starter batteries.

This non-isolated Victron Orion Smart 30A DC-DC charger transfers power from a 12V starter battery to charge another 12V service battery safely. It uses bulk, absorption, and float stages to optimise battery life, working alongside solar or generators. For dual-battery installs in commercial vehicles, consult our UK experts or use trusted partners.

Key Features

  • Bluetooth Smart enabled for monitoring, settings changes, and software updates via VictronConnect app.
  • Fully programmable charge algorithm or fixed output; adaptive absorption time.
  • Remote on/off via switch or relay; short circuit proof; parallels for higher current.
  • High temperature protection; IP43 rated when mounted vertically.
  • Screw terminals for easy installation, no special tools needed.

Technical Specifications

  • Input voltage range: 10-17 V
  • Under voltage shut down: 7 V
  • Under voltage restart: 7.5 V
  • Nominal output voltage: 12.2 V
  • Output voltage adjust range: 10-15 V
  • Output voltage tolerance: +/- 0.2 V
  • Output noise: 2 mV rms
  • Cont. output current at nominal output voltage and 40°C: 30 A
  • Maximum output current (10 s) at nominal output voltage: 40 A
  • Short circuit output current: 60 A
  • Cont. output power at 25°C: 430 W
  • Cont. output power at 40°C: 360 W
  • Efficiency: 87%
  • No load input current: < 80 mA
  • Standby current: Less than 1 mA
  • Operating temperature range: -20 to +55°C (derate 3% per °C above 40°C)
  • Humidity: Max. 95% non-condensing
  • DC connection: Screw terminals
  • Maximum cable cross-section: 16 mm² (AWG6)
  • Weight: 1.3 kg
  • Dimensions h x w x d: 130 x 186 x 70 mm
  • Protection category: IP43 (when installed with screw terminals oriented downwards)

Shipping

Available to the UK, Ireland, Africa, the Caribbean and worldwide. If shipping rate not shown at checkout, contact us on +44 2080640335 or info@energian.co.uk for a quote.

UK Expert Support

UK expert support available - contact us with any questions or support requests via phone, email or live chat, or visit our office for an in-person consultation.

Documents available for download