SolisStorage FlexHome 5kWh–40kWh LV Stackable Solar Battery System
- Start at 5kWh and add stackable 5kWh modules up to from 5kWh 40kWh per stack, or up to 160kWh with 4 stacks in parallel.
- Install indoors or outdoors: IP66 enclosure, C5M anti-corrosion class and smart heating for operation from -20°C to 55°C.
- Works directly with Solis low-voltage hybrid inverters, which detect the battery and set its default parameters automatically.
- Each stack consists of 1x - 8x FlexHome 5.12kWh battery module and 1x Solis FlexHome Stackable LV BMS.
SolisStorage FlexHome LV stackable solar battery
The SolisStorage FlexHome 5kWh–40kWh LV stackable solar battery system is a 51.2V lithium iron phosphate (LiFePO4) system. It is made up of a low-voltage BMS (FlexHome-CB210A-L) and 5kWh battery modules (FlexHome-BAT5kWh-L). It stores solar energy for use in the evening, during cheaper tariff periods or in a power cut, with up to 100% depth of discharge.
Key features
- Scalable: 1–8 stacked 5kWh modules per stack (5–40kWh). Up to 4 stacks in parallel give 5–160kWh in total.
- Smart heating: below 0°C the battery heats its cells to 10°C before charging, which takes about 1–3 hours depending on starting temperature.
- Layered safety: over/under-voltage, over-current and temperature protection, plus a DC breaker, DC fuses, aerogel insulation plates, fire suppression and explosion relief valves.
- Monitoring through the Solis inverter and the SolisCloud app or web portal: SOC, SOH, voltage, current, power and alarms.
- Quiet natural-convection cooling (≤30dB), with floor-standing or wall-mounted installation.
Where to use
Use it in homes, farms, workshops, garages and small commercial sites with a Solis low-voltage hybrid or off-grid inverter. Typical uses include solar self-consumption, time-of-use tariff shifting and backup for essential loads.
Solis sizing guide: about 10kWh for a 6kWp PV array with a 5kW inverter, 20kWh for 12–15kWp with a 10–12kW inverter, and 40kWh for 25–30kWp with a 20kW inverter.
Installation and compatibility
The battery is not plug-and-play. It contains lethal voltages and must be installed by a qualified electrician. Energian can arrange installation through trusted partners.
Outdoors, install under eaves or in a garage, out of direct sun and rain, with 800mm of working space in front. The DC and communication cables to the inverter must be no longer than 10m. Check that your inverter's ARM firmware meets Solis's minimum version.
SolisStorage FlexHome technical specifications
| Specification | Value |
|---|---|
| Performance | |
| Models | 5kWh / 10kWh / 15kWh / 20kWh / 25kWh / 30kWh / 35kWh / 40kWh |
| Control module / battery module | FlexHome-CB210A-L (210A) / FlexHome-BAT5kWh-L (5kWh) |
| Battery type | LiFePO4 |
| Nominal energy | 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40kWh |
| Rated voltage | 51.2V |
| Operating voltage | 44.8–57.6V (≥0°C); 36.8–57.6V (≤0°C) |
| Max. charging voltage | 57.6V |
| Min. discharge voltage | 44.8V (≥0°C) / 36.8V (≤0°C) |
| Cell capacity | 100Ah |
| Recommended charge & discharge current | 5kWh: 50A / 10kWh: 100A / 15kWh: 150A / 20kWh: 200A / 25–40kWh: 210A |
| Max. discharge current (datasheet) | 5kWh: 100A / 10kWh: 200A / 15–40kWh: 210A |
| Max. continuous charging current (manual) | 10kWh: 100A / 15kWh: 150A / 20kWh: 200A / 25–40kWh: 210A |
| Max. continuous discharge current (manual) | 10kWh: 200A / 15–40kWh: 210A |
| Max. charge & discharge current (system) | 210A |
| Max. peak current | 315A, 10s |
| Max. charge-discharge power | 10kW |
| Depth of discharge | Max. 100% DOD |
| Cycle life | ≥6,000 (datasheet V1.2); ≥8,000 (datasheet V1.6). Cell manufacturer data at 25°C, 0.2C charge and discharge, 70% EOL, 100% DOD |
| Scalability | Up to 8 modules per stack; up to 4 units in parallel; system energy 5–160kWh |
| Display | SOC indicator, status indicator |
| Communication | CAN/RS485 (CAN baud rate 9600) |
| Matched inverter brand | Solis |
| Protection | |
| Over/under voltage protection | Yes |
| Over current protection | Yes |
| Over/under temperature protection | Yes |
| DC breaker | Yes |
| DC overcurrent fuses | Yes |
| Aerogel thermal insulation plate | Yes |
| Fire protection function | Yes – activates at about 185°C (±10°C) inside the pack, within ≤5s |
| Explosion release valves | Yes – open at an internal/external pressure difference above 6 ±1.5kPa |
| Smart heating | Starts when cell Tmin ≤0°C in charging mode; stops at 10°C. Estimated time: 3h from -20°C, 2.5h from -15°C, 2h from -10°C, 1.5h from -5°C, 1h from 0°C |
| General specification | |
| Dimensions (W × H × D) | 5kWh: 800 × 494 × 285mm / 10kWh: 800 × 683 × 285mm / 15kWh: 800 × 872 × 285mm / 20kWh: 800 × 1,061 × 285mm / 25kWh: 800 × 1,250 × 285mm / 30kWh: 800 × 1,439 × 285mm / 35kWh: 800 × 1,628 × 285mm / 40kWh: 800 × 1,817 × 285mm |
| Weight | 5kWh: 76kg / 10kWh: 126kg / 15kWh: 176kg / 20kWh: 226kg / 25kWh: 276kg / 30kWh: 326kg / 35kWh: 376kg / 40kWh: 426kg |
| Cooling | Natural convection |
| Ingress protection | IP66 |
| Anti-corrosion class | C5M |
| Noise | ≤30dB |
| Shell type | Metal plate |
| Operating ambient temperature range | -20 to 55°C (smart heating function); charging -20 to 55°C (including heating film), discharging -20 to 55°C |
| Storage temperature range | -10 to 45°C; recommended 10 to 30°C |
| Relative humidity range | 5–95% RH (long-term 65% ±20% RH) |
| Max. operating altitude | 4,000m (derating from ≥2,000m) |
| Installation method | Floor standing / wall-mounted (floor-to-wall by default) |
| Max. DC and signal cable length to inverter | 10m |
| Front working space | At least 800mm |
| Standard combiner box | 3 units; only for hybrid inverters ≤10kW |
| Compatibility | |
| Compatible inverters | S6-EH1P(3-6)K-L-EU / S5-EH1P(3-6)K-L(Smart) / S6-EH1P(3-10)K-L-PLUS / S6-EH1P(9.9-18)K03-NV-YD-L / S6-EH2P(5-8)K02-SV-YD-L / S6-EH2P(9.6-16)K03-SV-YD-L-US / S6-EH3P(8-18)K02-NV-YD-L / S6-EH3P(7-10)K02-LV-YD-L / S5-EA1P3K-L / S6-EA1P(3.6-6)K-L / S6-EO1P(4-6)K-48 / S6-EO1P(4-5)K-48-EU |
| Recommended configurations (min. inverter ARM version) | S6-EH1P5K-L-PLUS: 2 × 5kWh / S6-EH1P6/8K-L-PLUS: 3 × 5kWh / S6-EH1P10K-L-PLUS: 4 × 5kWh / S6-EH1P12K03-NV-YD-L: 2 × 3 × 5kWh / S6-EH1P16/18K03-NV-YD-L: 2 × 4 × 5kWh (all 2C14); S6-EH3P8K02-NV-YD-L: 2 × 5kWh / S6-EH3P10K02-NV-YD-L: 2 × 2 × 5kWh / S6-EH3P12/15K02-NV-YD-L: 2 × 3 × 5kWh / S6-EH3P18K02-NV-YD-L: 2 × 4 × 5kWh (all 0D06, 2 battery ports, no combiner required); data logger 100141D9 |
| Standard compliance | |
| Certificates | IEC 62619, IEC 63056, ISO 13849, VDE 2510-50, UN 38.3, EN/IEC 61000-6-1/2/3/4, IEC 60730-1, IEC 60529 (IP), INMETRO 140, RoHS, REACH |
| What's in the box | |
| Low-voltage BMS | BMS, base, 2 mounting brackets, 2 expansion bolts, 2 installation screws, B+ and B- power harnesses to inverter (2m each), communication harness (2m), earth lead (2m), quick assembly manual, product specification, warranty card, packing list, levelling instrument |
| Each 5kWh battery module | Battery pack, 2 installation screws, packing list |
Documents available for download
- SolisStorage FlexHome-(5-40)kWh-L datasheet
- SolisStorage FlexHome-(5-40)kWh-L user manual
- SolisStorage FlexHome-(5-40)kWh-L quick installation manual
Shipping
Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, call +44 20 8064 0335 or email info@energian.co.uk for a quote.
UK expert support
Our UK team can help you size a FlexHome system, match it to your Solis inverter and arrange installation. Contact us by phone, email or live chat, or visit our office for an in-person consultation.
