EcoFlow STREAM 800W Microinverter + 2 x EcoFlow 500W Solar Panels + Panel Mounting Kit
A compact, plug-and-play solar kit built to efficiently convert solar power into usable home electricity—designed for seamless integration into your energy system.
Product Highlights
- IP67 water-resistant for reliable outdoor performance
- Delivers consistent solar power conversion—even under low sunlight
- Compatible with 99% of solar panel brands
- Plug-and-play installation makes setup fast and simple
- Flat roof, pitched roof, wall/facade mounting
Save Up to £115 Annually (estimated)
The STREAM 800W Microinverter works with 2 x 500W solar panels to produce up to 858 kWh per year. That's enough to power everyday essentials like your Wi-Fi router, fridge, and TV—saving you up to as much £115 a year on electricity bills. Actual savings will vary depending on the location of the kit.
Reliable Power—Even in Dim Conditions
Whether it's early morning or overcast skies, the microinverter activates with just 3W of input—ensuring your home stays powered from dawn to dusk.
Smarter Energy Control with Eco-AI
Connect to the EcoFlow App to automate your power usage with Eco-AI. The intelligent TOU (Time-of-Use) mode helps you reduce costs by analysing your grid and solar data, while the EcoFlow Assistant gives you full control of your energy use remotely.
Note: in the UK, wiring regulations require that the STREAM microinverter should be connected to your home wiring only via a fused spur using a DIY cable (select second option in this listing). The cable and relevant circuit in your fuseboard must be marked with a warning label indicating that the micro-inverter must be disconnected to de-energise the circuit. The installation must be performed by a licensed electrician. Contact us for advice.
Technical Specifications
| EcoFlow Microinverter | |
| Microinverter Input | |
| MPPT trackers | 2 |
| Max Input Power per tracker | 600W |
| Max Input Voltage | 65V DC |
| Start-up Voltage | 20V |
| MPPT Voltage Range | 16–60V DC |
| Max Current per MPPT | 16A |
| Short-Circuit Current per MPPT | 16A |
| Microinverter Output | |
| Rated Grid Output Power | 800VA |
| Max Grid Output Current | 3.48A |
| Rated Voltage | 230VAC |
| Voltage Range | 183–276VAC |
| Frequency Range | 45–55 Hz / 55–65 Hz |
| Microinverter General | |
| Operating Temperature | -40°C to 65°C |
| Weight | 3.2 kg |
| Dimensions | 252 × 180 × 35 mm |
| Protection Rating | IP67 |
| Warranty | 10 Years |
| EcoFlow Solar Panel | |
| MPPT trackers | 2 |
| Max Input Power per tracker | 600W |
| Max Input Voltage | 65V DC |
| Start-up Voltage | 20V |
| MPPT Voltage Range | 16–60V DC |
| Max Current per MPPT | 16A |
| Short-Circuit Current per MPPT | 16A |
| Solar Panels | |
| Rated Power Output | Up to 500W |
| Technology | N-Type TOPCon dual-side / bifacial |
| Diomensions | 1960 x 1134 x 30 mm |
| Weight | 26.6 kg |
| Waterproof/Dust Rating | IP68 |
| Warranty | 15-year product warranty and a 30-year linear power output guarantee |
| Mounting / Use | Designed for plug-and-play or multi-mounting setups on flat and pitched roofs, balconies, and wall / facades |
UK Safety and Legal Notice
UK Safety and Legal Notice
The EcoFlow STREAM 800W Microinverter is a grid-connected solar microinverter with a rated grid output of 800VA and maximum grid output current of 3.48A. It is designed to convert solar power from compatible PV panels into usable AC electricity for the home, with surplus generation exported to the grid where permitted.
UK plug-in solar regulations are changing. New regulations come into force on 27 August 2026 and are intended to permit compliant plug-in solar microgenerators to connect through a standard UK plug and socket. However, this route only applies where the complete product complies with the UK Government’s Plug-in Solar Device Interim Product Specification, including the required plug, cable, labelling, documentation, safety protections and G98/grid-registration requirements.
Until the new rules are in force, and unless the product is confirmed as compliant with the UK plug-in solar specification, the STREAM Microinverter should be connected to the property’s electrical installation only by a suitably qualified electrician, normally through a fused connection unit or other compliant dedicated connection, in accordance with BS 7671, applicable DNO/grid-connection requirements, Engineering Recommendation G98 and EcoFlow’s installation instructions.
The installer must assess the existing circuit before connection, including the condition and rating of the wiring, earthing, RCD/RCBO protection, labelling, isolation, cable routing and suitability of the socket or connection point. The connected circuit and any relevant protective devices should be clearly labelled to warn that the microinverter must be disconnected to de-energise the circuit.
The STREAM Microinverter is IP67 rated, but outdoor installation must still take account of mounting security, ventilation, shading, cable routing, mechanical protection, weather exposure, corrosion risk and safe access for maintenance. Solar panels and mounting systems must be installed securely and in accordance with the manufacturer’s instructions, taking account of wind load, fixing method and the condition of the supporting structure.
This product is a solar microinverter and does not itself provide battery storage. Plug-in batteries and plug-in solar-plus-battery systems are not covered by the new UK plug-in solar route and require separate assessment.
This summary is for general product information only and does not constitute legal, electrical or professional advice. Customers should always consult a qualified electrician or competent designer before installation.