EcoFlow Dual CT Smart Meter

  
By EcoFlow

Delivery available

EcoFlow Smart Meter Dual CT

Monitor your home's electricity use and a second circuit with the EcoFlow Smart Meter Dual CT. Designed for compatible EcoFlow STREAM energy storage systems, it provides live measurements to help the system match its output to household demand and make better use of solar energy.

Key Features

  • Two independent monitoring channels: measure the main grid connection alongside a third-party solar inverter circuit or a selected load.
  • Single-phase and three-phase monitoring: two CT cable assemblies provide six current transformer clamps in total, with a measurement range up to 120 A.
  • Live energy feedback: helps a compatible STREAM system respond to changes in household demand and manage solar self-consumption.
  • Overload monitoring: supplies current measurements to support the compatible system's protective response and feed-in adjustment.
  • Wireless connection: 2.4 GHz Wi-Fi and Bluetooth 5.0, with an external antenna included. RS485 is also available for compatible equipment with a communication port.
  • Compact installation: 20 × 66 × 90 mm meter body for mounting on a 35 mm DIN rail.

Where to Use

Suitable for monitoring at a home's distribution board as part of an EcoFlow STREAM installation. Use the first channel to measure the grid connection and the second to measure an existing solar inverter's AC circuit or a branch circuit. The two channels refer to two monitored circuits, each with up to three phases.

Compatibility and Energy Management

EcoFlow lists compatibility with STREAM 5000 and STREAM AC 5000. Connect the meter to the EcoFlow app and your 2.4 GHz home Wi-Fi network. The manual specifies that STREAM 5000 Series products use the wireless connection and do not require an RS485 cable.

For other EcoFlow products, please contact Energian to check model and firmware compatibility before ordering.

The meter supports system overload monitoring. Correct circuit design and appropriately rated circuit protection remain essential; installation and electrical connections must be completed by a qualified electrician in accordance with the manufacturer’s instructions and applicable UK regulations.

Technical Specifications

Manufacturer / model EcoFlow / Smart Meter Dual CT
Manufacturer SKU EFDualChannelCT
Monitoring configuration Two independent channels; single-phase or three-phase monitoring, with six CT clamps supplied
Current measurement range 0.08 - 120 A
Starting current 0.08 A
CT input current Rated 40 mA; maximum 48 mA
Rated voltage 230 V L-N / 400 V L-L
Operating supply voltage (L1–N) 90-276 V AC
Voltage measurement range 90-276 V AC
Starting voltage 90 V
Frequency range 45-65 Hz
Power consumption ≤1.5 W
Communication Bluetooth 5.0, 2.4 GHz Wi-Fi and RS485
Mounting 35 mm DIN rail
Dimensions 20 × 66 × 90 mm
Ingress protection / location IP30; indoor use only
Pollution degree / overvoltage category PD2 / CAT III
Operating temperature -30 °C to +70 °C
Storage temperature -40 °C to +85 °C
Relative humidity 5-95% RH, non-condensing
Maximum operating altitude 2,000 m
Manufacturer warranty 2 years

What's in the Box

  • 1 × EcoFlow Smart Meter Dual CT
  • 1 × extension antenna
  • 2 × external CT cable assemblies, each with three clamps (six CT clamps in total)

For indoor installation in a clean, dry, well-ventilated location. The meter has an IP30 protection rating.

Documents available for download: