EcoFlow Power Ocean 2 Plus Single-Phase Hybrid Inverter 6kW

  
By EcoFlow
Minus Plus
Bulk Supply Quote

Delivery available

More details Right

EcoFlow PowerOcean 2 Plus 6kW Single-Phase Hybrid Inverter 

  • 6kW single-phase hybrid inverter for solar PV, compatible PowerOcean battery storage and managed home energy use.
  • Up to 12kW maximum PV input across two independent MPPT trackers.
  • Supplied with a 120A smart meter for measuring household grid import, export and energy flows.

EcoFlow PowerOcean 2 6kW hybrid inverter for solar and battery systems

The EcoFlow PowerOcean 2 6kW Single-Phase Hybrid Inverter is designed for compatible single-phase homes installing solar PV, EcoFlow PowerOcean LFP battery storage, or both. It coordinates energy between the PV array, battery, household consumption and the grid to support solar self-consumption and battery-based energy management.

With two MPPT trackers and a maximum PV input of 12kW, the inverter can support solar arrays on two roof orientations or two independently configured strings. This product is supplied with a 120A smart meter. An 80A meter may be available where required by the installation; contact Energian before ordering to confirm suitability.

Key features

  • 6,000W rated AC output and 6,000VA maximum apparent power.
  • 12,000W maximum solar PV input across two MPPT trackers.
  • 18A maximum PV input current per MPPT with a single PV input, or 16A per MPPT with dual PV inputs.
  • Compatible with EcoFlow PowerOcean LFP battery storage up to 15.3kWh.
  • IP65-rated enclosure for indoor or outdoor installation in an appropriate location.

Where to use the EcoFlow PowerOcean 2 6kW inverter

The EcoFlow PowerOcean 2 6kW hybrid inverter is suitable for compatible single-phase homes with existing or planned solar PV and battery storage. It can be specified for solar self-consumption, energy management around household demand, and backup-load systems where the complete installation has been designed for backup operation.

It is particularly suitable for larger domestic PV systems, homes with EV charging, heat pumps or higher electrical demand, and properties with solar arrays split across two orientations. Final inverter selection depends on the site supply, proposed solar array, battery capacity, expected loads and grid-connection requirements.

This inverter is not a plug-and-play product. A competent installer must confirm PV string voltage and current, battery compatibility, grid metering, protective devices, backup circuits and G98/G99 requirements. UK expert support is available, and Energian can help arrange installation through trusted partners.

Technical specifications

Model EF HD-P1-6K-S1
Inverter type Single-phase hybrid inverter
Meter supplied 120A smart meter
Maximum PV power 12,000W
Maximum PV input voltage 600V
MPPT voltage range 90–520V
Number of MPPT trackers 2
Maximum input current per MPPT 18A with single PV input; 16A with dual PV inputs
Maximum short-circuit current per MPPT 20A
Backfeed current to PV array 0A
PV overvoltage category II
Battery rated voltage 790V
Battery maximum voltage 800V
Battery rated current 7.6A
Battery maximum current 8.4A
Maximum battery capacity 15.3kWh
Grid connection L + N + PE
Rated AC input power 6,000W
Maximum AC input apparent power 6,000VA
Rated AC input voltage 220 / 230 / 240V, L + N + PE
Maximum AC input current 32A
Nominal frequency 50 / 60Hz
AC input overvoltage category III
Rated on-grid output power 6,000W
Maximum on-grid apparent power 6,000VA
Rated on-grid output voltage 220 / 230 / 240V, L + N + PE
Rated on-grid output current 26.1A
Maximum on-grid output current 30A
On-grid total harmonic distortion at rated power ≤3%
Power factor -0.8 to 1 to +0.8
Maximum backup output power 6,000VA
Backup output voltage 220 / 230 / 240V, L + N + PE
Backup nominal frequency 50 / 60Hz
Backup rated output current 26.1A
Backup maximum output current 32A
Maximum efficiency >96.5%
European weighted efficiency >96%
GFCI Supported
Insulation resistance detection Supported
Anti-islanding protection Supported
PV reverse-polarity protection Supported
AC overcurrent protection Supported
AC short-circuit protection Supported
AC overvoltage protection Supported
Certificates CE / CB / DEKRA MARK
Safety standards IEC/EN 62109-1, IEC/EN 62109-2
Grid-tied standards G98, G99, G100, VDE-AR-N 4105, CEI 0-21, UTE C15-712-1, VDE 0126-1-1, EN 50549-1, C10/11, NTS631, UNE 217001, UNE 217002, PPDS, PTPiREE, PSE, NC RfG, Ordinance No.140, NRS 097-2-1
EMC standards EN/IEC 61000-6-1/2/3/4, IEC 61000-4-16/18/29, IEC 61000-2-2, EN 300328, EN 301489-1, EN 301489-17, EN IEC 62311
Topology Non-isolated
Ingress protection rating IP65
Protective class Class I
Operating temperature range -20°C to +50°C; derating above +40°C or below 0°C
Storage temperature range -30°C to +60°C
Operating humidity 0–100%, condensing
Maximum operating altitude 3,000m; derating above 2,000m
Dimensions (W × D × H) 679.6 × 182.7 × 280mm
Weight 21.5kg
Noise emission 40dB
Night-time self-consumption <30W
Cooling method Natural convection
Communication methods RS485, CAN, Wi-Fi, Bluetooth, WAN and 4G
Wi-Fi frequency range / maximum output power 2,400–2,483.5MHz / 17dBm
Bluetooth frequency range / maximum output power 2,400–2,483.5MHz / 8dBm
Pollution degree PD3
Environmental category Outdoor / indoor

Documents available for download

Shipping and UK expert support

Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, contact us on +44 2080 640335 or info@energian.co.uk for a quote.

UK expert support is available for product questions, inverter selection and system-design support. Contact Energian by phone, email or live chat, or visit our office for an in-person consultation.