Dyness Stack100 PRO HV 5.12kWh Solar Battery Module
- Build a high-voltage battery from 15.36kWh to 76.8kWh per cluster, and up to 12 clusters in parallel.
- Install indoors or outdoors: IP66 enclosure with natural cooling and no fans.
- Stacks without cables between modules, with up to 1C (100A) charge and discharge.
Dyness Stack100 PRO HV 5.12kWh solar battery
The Dyness Stack100 PRO HV 5.12kWh solar battery (module S51100 Pro) is a 51.2V, 100Ah lithium iron phosphate unit. Modules stack in series on a base, under the SBDU100 Pro battery controller (BDU), to form a high-voltage cluster for compatible hybrid inverters. It suits homes, farms and small commercial and industrial sites where space or floor loading is limited.
Key features
- Modular capacity: 3 to 15 modules per cluster, giving 134.4–864V operating voltage and 15.36–76.8kWh.
- Usable energy: 4.864kWh per module at 95% depth of discharge; ≥8,000 cycles (0.2C, 25°C, 95% DOD, 70% EOL).
- Safety: an aerosol fire extinguisher in each pack, a pressure relief valve and temperature probes, plus a BMS protecting against over-charge, over-discharge, over-current and temperature extremes.
- Monitoring: built-in WiFi, the Dyness app and over-the-air (OTA) firmware updates.
- Optional heating for charging below 0°C, plus optional aerogel pads and module fireproofing.
Where to use
Use with a compatible high-voltage hybrid inverter to store solar energy for evening use, shift consumption to cheaper tariff periods, or back up essential circuits. Typical sites include larger homes, farms, workshops, offices and small commercial premises.
The manufacturer also lists 1C applications such as charging stations and grid frequency regulation. For larger sites, connect up to 12 clusters in parallel.
What you need for a complete system
This listing is for one 5.12kWh battery module. Each cluster also needs one SBDU100 Pro controller with base, and a minimum of 3 modules. Clusters of more than 8 modules need the expansion kit and are best installed in two columns.
Example: a 6-module cluster (30.72kWh) measures 657 × 459 × 1,306mm and weighs 364.6kg, according to the manual's scope of delivery table.
Installation and compatibility
This is a high-voltage DC system that must be installed by a qualified electrician. The earth resistance must be ≤1Ω. Keep the battery out of direct sunlight and maintain the manual's minimum clearances. Energian can arrange installation through trusted partners.
Use only S51100 Pro modules. Do not mix them with other Dyness models. A new cluster may be added only within 3 years of the existing one, and the clusters must differ by less than 20V. Check your inverter model against the latest Dyness compatibility list.
Dyness Stack100 PRO technical specifications
| Specification | Value |
|---|---|
| Battery module – S51100 Pro | |
| Battery type | LiFePO4 (LFP) |
| Nominal battery energy | 5.12kWh |
| Usable battery energy | 4.864kWh |
| Nominal capacity | 100Ah |
| Nominal voltage | 51.2V |
| Cells per module | 16 × 3.2V, 100Ah (320Wh) |
| Module dimensions (W × D × H) | 657 × 459 × 191mm |
| Module weight | 55kg |
| Pollution degree | II |
| System performance | |
| Module number per cluster | 3–15 |
| Operating voltage | 134.4–864V |
| System energy range | 15.36–76.8kWh |
| Recommended charge & discharge C rate | 0.5C (50A) |
| Max. charge & discharge C rate | 1C (100A) |
| Peak discharge current (25°C) | 125A, 2 minutes |
| Recommended charge & discharge power | 2.56kW per module |
| Max. charge & discharge power | 5.12kW per module |
| Depth of discharge (DOD) | 95% |
| Cycle life | ≥8,000 cycles (0.2C charging and discharging, 25°C, 95% DOD, 70% EOL) |
| Expansion | Up to 12 clusters in parallel |
| Warranty period | 10 years (refer to Dyness warranty letter) |
| Cluster configurations (manual): voltage / energy / dimensions W × D × H / weight | |
| 3S | 134.4–172.8V / 15.36kWh / 657 × 459 × 799mm / 199.6kg |
| 4S | 179.2–230.4V / 20.48kWh / 657 × 459 × 968mm / 254.6kg |
| 5S | 224–288V / 25.60kWh / 657 × 459 × 1,137mm / 309.6kg |
| 6S | 268.8–345.6V / 30.72kWh / 657 × 459 × 1,306mm / 364.6kg |
| 7S | 313.6–403.2V / 35.84kWh / 657 × 459 × 1,475mm / 419.6kg |
| 8S | 358.4–460.8V / 40.96kWh / 657 × 459 × 1,644mm / 474.6kg |
| 9S (two columns) | 403.2–518.4V / 46.08kWh / 1,644mm + 360mm / 548.4kg |
| 10S (two columns) | 448–576V / 51.20kWh / 1,644mm + 529mm / 603.4kg |
| 11S (two columns) | 492.8–633.6V / 56.32kWh / 1,644mm + 698mm / 658.4kg |
| 12S (two columns) | 537.6–691.2V / 61.44kWh / 1,644mm + 867mm / 713.4kg |
| 13S (two columns) | 582.4–748.8V / 66.56kWh / 1,644mm + 1,036mm / 768.4kg |
| 14S (two columns) | 627.2–806.4V / 71.68kWh / 1,644mm + 1,205mm / 823.4kg |
| 15S (two columns) | 672–864V / 76.80kWh / 1,644mm + 1,374mm / 878.4kg |
| Net weight formula (datasheet) | 34.6 + 55 × n kg (n = number of modules); expansion base and upper cover 18.8kg |
| Single cluster dimension formula (datasheet) | 657 / 460 / 292 + 169 × n mm (W/D/H); expansion upper cover height 92mm |
| Battery controller – SBDU100 Pro | |
| Operating voltage | 134.4–864V |
| Max. continuous current | 100A (datasheet); manual lists max. output current 125A |
| Dimensions (W × D × H) | 657 × 460 × 193mm |
| Weight | 23.5kg |
| Protection level | IP66 |
| Interfaces | Power On switch, Power Wake button, positive and negative sockets, inverter CAN/RS485 (RJ45), Parallel IN/OUT, TCP (for certain high-power inverters), WiFi antenna, DC breaker, earth terminal |
| Base dimensions | 657 × 459 × 99mm |
| Environmental | |
| Charge temperature range | 0°C to +55°C; −20°C to +55°C with optional heating (manual: −20°C to +50°C for heating versions) |
| Discharge temperature range | −20°C to +55°C |
| Optimum operating temperature | 18–30°C |
| Protection level | IP66 |
| Cooling method | Natural cooling |
| Noise | ≤50dB |
| Installation | Cable-free stacking on a floor-fixed base with wall brackets; indoor or outdoor, out of direct sunlight |
| Earth resistance | ≤1Ω |
| Ceiling height (8-module column) | Greater than 1,844mm (column approx. 1,644mm + 200mm above BDU) |
| Long-term storage | 5–45°C, relative humidity <65%, charged to 50–55% SOC; recharge every 10–12 months, SOC no less than 50% |
| Communication and safety | |
| Communication | CAN/RS485; TCP |
| User interface | WiFi + app; built-in WiFi module with app OTA function |
| Safety protection | Pressure relief valve, aerosol fire extinguisher, temperature probe, aerogel pad between batteries (optional), fireproof protection for the module (optional) |
| Parallel clusters | Max. 12; voltage difference between clusters <20V; 100% SOC when connecting; new cluster within 3 years of existing; 120Ω CAN resistor on master Parallel IN |
| Certification & safety standards | CE-EMC, CE-RED, IEC 62619, IEC 63056, IEC 62477, IEC 62040, UN38.3, VDE 2510 |
| Compatible inverters (datasheet) | Solis, GoodWe, Growatt, Deye, Solinteg etc. |
| Compatible inverters (manual) | Dyness, GoodWe, Solis, Deye, Solplanet, Solinteg, Sunways, Hoymiles, SAJ, Sinexcel, Growatt, ATESS, Megarevo, Sineng etc. |
| Supplied with controller kit (package A, manual) | |
| Contents | BDU, base, 2 wall fixing brackets, M6×80 and M12×100 expansion bolts, 3 waterproof covers, CAN resistor, 2,050mm earth cable, 2,000mm inverter and parallel communication cables; 4AWG/8AWG/10AWG power cables optional |
| Supplied with each module (package B) | S51100 Pro module, 4 × M5×12 screws |
Documents available for download
Shipping
Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, call +44 20 8064 0335 or email info@energian.co.uk for a quote.
UK expert support
Our UK team can help you size a Stack100 PRO system, check inverter compatibility and plan installation. Contact us by phone, email or live chat, or visit our office for an in-person consultation.
