All in One Fox ESS Evo Gen 2 Series Hybrid Energy Storage System with 5kW Inverter and 10.24kWh LFP Battery

  
By Fox ESS

Bulk Supply Quote

Delivery available

All in One Fox ESS EVO 10E Gen 2 Hybrid Energy Storage System with 5kW Inverter and 10.24kWh LFP Battery

  • Hybrid inverter and 10.24kWh LiFePO4 battery in one IP66 cabinet, for indoor or outdoor installation on a wall or floor.
  • Keeps essential circuits running in a power cut, with EPS switchover in under 4ms.
  • Grows with your needs: add up to 3 ET10 batteries, or run up to 3 units in AC parallel.

Fox ESS EVO 10E Gen 2 all in one energy storage system

The Fox ESS EVO 10E Gen 2 (model EVO 10E-5-H) combines a 5kW single-phase hybrid inverter with a 10.24kWh LFP battery in one 584 × 1,009 × 197mm unit. It stores surplus solar for evening use or cheaper tariff periods and supplies backup power during outages. The battery can use 95% of its capacity, and FoxCloud 2.0 handles monitoring.

Key features

  • Two MPPT trackers handle up to 16,000Wp of PV, with an 80–550V MPPT range and 20A per input.
  • Battery charges at up to 10,000W, with 97.33% maximum PV-to-battery efficiency and 96.40% battery-to-AC efficiency.
  • 5,000VA EPS output, 100A load start capability for 2 seconds and the 200% 10-second overload rating stated on the datasheet.
  • Built-in protection: AFCI, Type II DC and AC surge protection, earth-fault and leakage-current detection, and a DC switch.
  • Remote monitoring by LCD, app and web, plus WiFi, LAN, Bluetooth, Ethernet, optional 4G, SG Ready and dry contact.

Where to use

The unit suits homes, home offices, farm buildings, workshops and small commercial premises on a single-phase supply. Typical uses include higher solar self-consumption, time-of-use tariff shifting and backup for fridges, lighting, IT and heating controls.

The IP66 enclosure and an operating range of -20°C to 55°C allow installation in garages, outbuildings or outside walls.

Installation and grid connection

The system is not plug-and-play. It must be installed and commissioned by a qualified installer, including DNO notification under the UK grid connection rules. Energian can arrange installation through trusted UK partners.

Order installation through our trusted partners and pay zero VAT. Installers can call 020 8064 0335 to join our authorised partner network.

Fox ESS EVO 10E Gen 2 (EVO 10E-5-H) technical specifications

Specification EVO 10E-5-H
PV input (hybrid)
Max. PV array power 16,000Wp
Max. input power 15,000W
Max. MPPT input power 8,000 / 8,000W
Max. input voltage 600V (voltages above 600V may damage the inverter)
Start-up input voltage 80V
Nominal voltage 360V
MPPT operating voltage range 80–550V
Max. input current 20 / 20A
Max. short-circuit current 25 / 25A
No. of MPP trackers 2
Strings per MPP tracker 1+1
Battery
Battery type LFP (LiFePO4)
Battery energy 10.24kWh
Max. charge power 10,000W
Depth of discharge 95%
DC expansion Yes, max. 3 × ET10 batteries
AC output (grid)
Rated power 5,000W
Rated apparent power 5,000VA
Max. apparent power 5,500VA
Rated output current (per phase) 22.7 / 21.7 / 20.8A (220 / 230 / 240V)
Max. AC current (per phase) 25.0 / 23.9 / 22.9A
THDi <3% at rated power
AC input (grid)
Max. apparent power 8,800VA
Max. input current (per phase) 40.0A
AC output and input
Nominal voltage 220 / 230 / 240V, L/N/PE
Nominal frequency 50 / 60Hz, ±5
Power factor 1 (adjustable from 0.8 leading to 0.8 lagging)
Inrush current 3.2A at 1ms
EPS output
Max. apparent power 5,000VA
Load start capability 100A at 2s
Nominal voltage 220 / 230 / 240V
Nominal frequency 50 / 60Hz, ±5
Max. output current (per phase) 22.7 / 21.7 / 20.8A
Power factor 1 (adjustable from 0.8 leading to 0.8 lagging)
Switch time <4ms
THDv <3% at linear load
Parallel operation Yes, max. 3 units
Overload (datasheet feature) 200% overload for 10 seconds
Efficiency
Max. conversion efficiency 97.62%
European efficiency 97.20%
Max. battery charge efficiency (PV to BAT) at full load 97.33%
Max. battery charge/discharge efficiency (BAT to AC) at full load 96.40%
Protection
PV reverse polarity protection Yes
Anti-islanding protection Yes
Output short protection Yes
Leakage current protection Yes
Insulation resistance detection Yes
Overcurrent protection Yes
Overtemperature protection Yes
Earth fault Yes
DC/AC surge protection DC: Type II / AC: Type II
AFCI protection Yes
DC switch Yes
General data
Dimensions (W × H × D) 584 × 1,009 × 197mm
Weight 108kg
Installation Floor-mounted / wall-mounted
Cooling method Intelligent air cooling
Operating temperature (limited performance without warm-up) -20 to 55°C
Operating temperature (full performance with warm-up) -25 to 55°C
Storage temperature 0 to 35°C
Humidity (no condensation) 0–100%
Altitude <4,000m (derating above 2,000m)
Ingress protection IP66 (for outdoor use)
Standby consumption <20W
Noise emission <45dB, average (measured with the decorative cover installed)
Inverter topology Non-isolated
Communication interface Ethernet, EMS, Meter, WiLAN (WiFi + LAN + Bluetooth), 4G (optional), DRM, Ripple Control, USB, SG Ready, Dry Contactor
Display LED, LCD, app, website
Monitoring FoxCloud 2.0
Export limit control Yes
Button Capacitive touch sensor × 1
Standard compliance (more available on request)
Safety EN/IEC 62109-1, EN/IEC 62109-2, EN/IEC 62477-1, EN/IEC 62040 (AU)
EMC EN IEC 61000-6-1:2019, EN IEC 61000-6-3:2021, EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019, IEC 62920:2017
RED EN 50665:2017, EN IEC 62311:2020, EN 301 489-1 V2.2.3 (2019-11), EN 301 489-17 V3.2.4 (2020-09), EN 300 328 V2.2.2 (2019-07), EN 55032:2015+A11:2020+A1:2020, EN 55035:2017+A11:2020
Grid regulation G98, CEI 0-21, AS/NZS 4777.2:2020, NRS 097-2-1, IEC 61727, EN 50549-1, P140/P515
Battery regulation IEC 62619:2022
Transportation UN 38.3

Documents available for download

Shipping

Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, call +44 20 8064 0335 or email info@energian.co.uk for a quote.

UK expert support

Our UK team can help you size an EVO 10E system, plan PV strings and expansion, and arrange installation. Contact us by phone, email or live chat, or visit our office for an in-person consultation.