AIKO 495W Neostar 3S N-Type Mono-Glass ABC All Black MC4-EVO2A Gen 3 Solar Panels
- Generate 495W per panel at standard test conditions, with 24.8% module efficiency for projects where available roof space matters.
- All-black mono-glass construction with N-type ABC cells and a black anodised aluminium frame.
- 30-year product and linear performance warranties, with MC4-EVO2A connectors and a 1,762 × 1,134 × 30mm module format.
AIKO 495W Neostar 3S all-black solar panel
The AIKO 495W Neostar 3S Gen 3 solar panel combines high output per square metre with an all-black finish for commercial, industrial and residential PV installations. The AIKO-A495-MCE54Mb uses N-type ABC cells, 3.2mm tempered front glass and a weather-resistant backsheet, delivering 24.8% module efficiency in a panel weighing 21.1kg ±3%.
Key features
- Space-efficient generation: 495W rated output and 24.8% efficiency help maximise installed capacity within the available array area.
- N-type ABC technology: all-back-contact cells with AIKO’s listed partial-shading optimisation and micro-crack resistance features. Shading must still be considered during system design.
- All-black appearance: black anodised aluminium frame and an uncluttered front finish for visible rooftop installations.
- Temperature performance: a maximum-power temperature coefficient of −0.26%/°C, supporting accurate assessment of output changes as cell temperature rises.
- Long-term warranty cover: 30-year product and linear performance warranties, with at least 88.85% of original rated output at year 30, subject to manufacturer terms.
Where to use
Consider the AIKO 495W Neostar 3S for warehouse and logistics-site rooftops, commercial offices, agricultural buildings, residential roofs and professionally designed ground-mounted arrays. Its all-black finish also suits projects where the appearance of the installation is important.
This is a mono-glass panel with a backsheet, not a bifacial double-glass module. Design the system around front-side generation, local shading conditions and the selected inverter’s voltage and current limits.
Use a mounting system compatible with the 30mm frame, module dimensions and AIKO’s approved fixing positions. Energian can assist with module quantities, inverter string design, mounting compatibility and DC protection. Installation can be arranged through trusted partners.
Technical specifications
Electrical values apply to AIKO-A495-MCE54Mb at standard test conditions. Product specifications follow the supplied Neostar 3S54 480–495W datasheet, revision 202601_1.1_EN.
| Specification | Value |
|---|---|
| Product identification | |
| Manufacturer | AIKO |
| Product range | Neostar 3S54 |
| Generation | Gen 3 |
| Datasheet series | AIKO-A-MCE54Mb |
| Exact module model | AIKO-A495-MCE54Mb |
| Datasheet power range | 480–495W |
| Datasheet revision | 202601_1.1_EN |
| Cell technology | N-type ABC, all-back-contact |
| Module construction | Mono-glass with weather-resistant backsheet |
| Appearance | All black |
| Electrical characteristics at STC | |
| Maximum power output, Pmax | 495W |
| Module efficiency | 24.8% |
| Maximum power voltage, Vmp | 34.80V |
| Maximum power current, Imp | 14.23A |
| Open-circuit voltage, Voc | 41.20V |
| Short-circuit current, Isc | 14.92A |
| Power tolerance | 0 to +3% |
| Standard test conditions | AM1.5; irradiance 1,000W/m²; cell temperature 25°C |
| Mechanical construction | |
| Number of cells | 108, arranged 6 × 18 |
| Front glass | 3.2mm tempered glass |
| Backsheet | High weather-resistant backsheet |
| Frame | Black anodised aluminium |
| Dimensions, L × W × H | 1,762 × 1,134 × 30mm |
| Length tolerance | ±2mm |
| Width tolerance | ±2mm |
| Frame-depth tolerance shown in drawing | ±1mm |
| Module weight | 21.1kg ±3% |
| Junction box | IP68, with 3 bypass diodes |
| Connector designation | MC4-EVO2A |
| Module cable cross-section | 4mm² (IEC); 12AWG (UL) |
| Module cable length | Positive and negative leads: 1,200mm each, shown as ±1,200mm in the datasheet |
| Mounting-hole set 1 | 4 × 9 × 14mm, as shown in the module drawing |
| Mounting-hole set 2 | 4 × 7 × 10mm, as shown in the module drawing |
| Mounting-hole spacing along module length | 1,400mm and 1,100mm, each ±1mm, as shown in the drawing |
| Grounding holes | 4 × Ø4.3mm |
| Drain holes | 8 × 3.5 × 8mm |
| Temperature characteristics | |
| Temperature coefficient of maximum power, Pmax | −0.26%/°C |
| Temperature coefficient of open-circuit voltage, Voc | −0.22%/°C |
| Temperature coefficient of short-circuit current, Isc | +0.05%/°C |
| Operating temperature | −40°C to +70°C |
| Electrical limits and mechanical testing | |
| Maximum system voltage | 1,500V DC |
| Maximum series fuse rating | 25A |
| Protection class | Class II |
| Maximum front static loading | 5,400Pa |
| Maximum rear static loading | 2,400Pa |
| Mechanical-load qualification | Test-load capability depends on the approved fixing arrangement. Determine permissible design loads using the installation manual, applicable safety factors and site conditions. |
| Hail test | 40mm-diameter hail at 23m/s |
| Fire rating | IEC Class C |
| Standards and conformity listed on the datasheet | |
| PV module standards | IEC 61215; IEC 61730 |
| EU directive listed | 2014/35/EU |
| Conformity marking shown | CE |
| Management-system standards listed | ISO 9001:2015; ISO 14001:2015; ISO 45001:2018. These relate to management systems, not additional module electrical ratings. |
| Warranty and degradation | |
| Product warranty | 30 years, subject to manufacturer terms |
| Linear performance warranty | 30 years, subject to manufacturer terms |
| First-year degradation | ≤1% |
| Annual degradation from years 2–30 | ≤0.35% |
| Guaranteed performance after year 1 | 99.0% of original rated output |
| Guaranteed performance at year 25 | 90.6% of original rated output |
| Guaranteed performance at year 30 | 88.85% of original rated output |
| Optional warranty-related coverage | The datasheet states optional Munich Re coverage is available upon request; inclusion is not assumed. |
| Installation and ordering information | |
| Installation personnel | Qualified personnel familiar with PV mechanical and electrical installation requirements |
| Mounting | Use approved bolt or clamp arrangements for the exact module model, frame and required loading. |
| String design | Check cold-weather open-circuit voltage, operating current and the inverter’s input limits. |
| Connector matching | Use approved mating connectors for the supplied MC4-EVO2A connections. |
| Manufacturer packing quantity | 37 modules per pallet; 222 modules per 20ft GP container; 962 modules per 40ft HC container. These are packing quantities, not a stated minimum order. |
Documents available for download
- AIKO Neostar 3S54 AIKO-A-MCE54Mb 480–495W datasheet
- AIKO PV module installation and maintenance manual
Shipping
Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, contact us on +44 20 8064 0335 or info@energian.co.uk for a quote.
UK expert support
Energian’s UK team can help with panel selection, mounting compatibility, inverter string design and complete solar PV system planning. Contact us by phone, email or live chat with questions or support requests, or arrange an in-person consultation at our office.