EcoFlow STREAM DIY Cable - 15m length.
In the UK it's a legal requirement to connect an EcoFlow STREAM Microinverter to your home wiring by means of a fused spur.
This cable allows you to do this over a distance of up to 15m.
Note: the image shows a standard length STREAM DIY cable; the cable described in this listing is 15m long.
To comply with UK wiring regulations, the BKW-AC cable (which connects the inverter output to the home 230V wiring) must be connected to a fused spur - the white box shown to the right of the sockets in the photo below. Inside this box, the cable should pass through a 13A fuse and switch before being connected to one of the home circuits. In the photo, it is connected to the same circuit that powers the adjacent socket, but the installation does not need to be next to a socket. A blank plate can also be used to replace an existing socket.
