HIGH EFFICIENCY 100A MPPT SOLAR CHARGE CONTROLLER FOR SOLAR PANELS UP TO 1250W (12V) / 2500W (24V)/ 5000W (48V) UP TO 200V

MPPT Technology: This controller uses advanced Maximum Power Point Tracking (MPPT) to continuously adjust the solar input, ensuring optimal efficiency even in variable sunlight. With a wide input voltage range up to 200V and support for system voltages of 12V, 24V, 36V, and 48V, it significantly outperforms standard PWM controllers. Supports up to 5000W of solar input, depending on battery voltage.

Comprehensive System Protection: Built-in electronic protections include reverse current prevention, overcharging and deep discharge protection, as well as safeguards against overvoltage, overload, short circuits, and reverse polarity. The controller features a self-diagnostic function and advanced fault-targeting technology.

Lithium Battery Charging: Compatible with lithium batteries, with charging parameters configurable via PC software or mobile app.

Advanced System Monitoring:

• Automatically recognises 12/24/36/48V battery systems (connect battery before solar)
• Built-in LCD displays voltage, current, state of charge, and accumulated energy data
• Manual battery type selection: sealed, flooded, or gel
• Removable panel for fuse access in the terminal compartment
• Dry contact terminals to control load output and start a generator when battery is low
• 100A current limiting enables system expansion with additional solar panels
• Parallel capability: connect up to 5 additional controllers using parallel adapter (RS485 cables required)

Versatile Connectivity Options:

1. Remote Meter (MT50): View performance data and manually adjust settings via LCD display
2. Wi-Fi Module: Monitor and configure the controller via free Android/iOS app. Requires RJ45 to RJ45 extension cable (sold separately)
3. RJ45 to USB Cable: Connect to a Windows PC to monitor and configure via Solar Station Monitor. Allows full customisation including lithium battery charging profiles

Precision Temperature Management: Built-in temperature sensor and intelligent heat dissipation optimise charging. An optional remote temperature sensor can be connected for more accurate battery temperature monitoring. (Built-in sensor not active for lithium batteries)

• High-efficiency MPPT charging (>95%)
• Automatic voltage detection: 12V / 24V / 48V (lead-acid)
• 3 pairs of terminals (solar, battery, load) – supports up to 16mm² cable
• Max solar panel voltage: 200V
• Max solar panel power: 1250W (12V), 2500W (24V), 5000W (48V)
• Temperature compensation: -3mV/°C/2V (not applicable to lithium)
• Comprehensive protection: overvoltage, reverse polarity, short circuit, overload
• Communication ports: RS485 / RJ45
• Negative common ground design
• Current limiting: 100A
• Self-consumption: 98mA (12V), 60mA (24V), 46mA (48V)
• Operating temperature: -25°C to +50°C
• Dimensions: 394 × 242 × 143 mm
• Mounting dimensions: 300 × 230 mm
• Weight: 7.4 kg
• Mounting holes: 7 mm diameter

Warranty: 1 year