Charge Ahead with Intelligence: Zappi Eco-smart 7kW EV Charger
The Zappi Eco-smart is a special offer made up of the following items:
- Zappi Eco-smart 7kW 1PH Type 2 Untethered Black EV Charger, and
- myEnergi Retrofit Tamper Kit included to be compliant with UK Electric Vehicle (Smart Charge Points) Regulations.
The Zappi Eco-smart stands as the most intelligent home EV charger globally, offering adaptability that sets it apart. This adaptive charger seamlessly draws power from the grid, solar, or wind, providing unparalleled flexibility. Track your charging performance and schedule sessions effortlessly through the user-friendly smartphone app, ensuring a hassle-free experience. Compatible with any Type 2 electric vehicle, the Zappi is your gateway to efficient and eco-friendly charging.
- Flexible Charging: Zappi Eco-smart Untethered lets you choose power directly from Solar or Wind Generation, enhancing the green credentials of your EV. Universal socket ensures compatibility with every EV, regardless of solar panel or wind turbine ownership.
Three Electric Car Charging Modes:
- Eco: Balances green energy and grid power, dynamically adjusting to minimize imported power.
- Eco+: Adapts charge power based on overall home power consumption, pausing when grid power is excessive and resuming during surplus free power availability.
- Fast: Charges the vehicle at maximum power for swift charging.
- Built-in RCD Protection and Grid Sensor(s): Ensures safety with built-in RCD protection against electrical faults. Supplied clip-on grid sensor(s) optimize energy management and provide accurate consumption measurements.
- Zappi App: Pair your Zappi Eco-smart Untethered with the myEnergi Zappi App for remote device access and control worldwide. Set timers on the app for convenient charging during periods with the lowest rates.
3-Year Product Warranty: Zappi Eco-smart Type 2 is backed by a 3-year manufacturer’s warranty, offering peace of mind against defects or malfunctions during regular use.
Prompt Delivery: Explore the cutting-edge features of the Zappi Eco-smart EV Charger with prompt 2-3 working days delivery within the UK (longer to the Highlands, islands, and Northern Ireland).
Elevate your EV charging experience with the intelligence and adaptability of the Zappi, setting new standards in home charging.
|Rated Power: 7kW (Single Phase)
|Rated Supply Voltage: 230V AC Single Phase
|Supply Frequency: 50Hz
|Charging Current: 6A to 32Amax (Variable)
|Standby Power Consumption: 3W
|Integral Protection: 6mA DC residual current protection (RDC-DD in accordance with EN 62955)
Economy Tariff Sense: Input 3.3 – 230Vrms AC Sensing (4.0kV Isolated)
Volt Free Contact (24Vdc Supplied from the Zappi)
|Wireless Interface: 868/915 MHz (Proprietary Protocol) for Wireless Sensor and Remote Monitoring Options
|WiFi Connectivity: 2.4GHz 802.11BGN Connection up to 150 Mbps
|Grid Current Sensor: 100A max. Primary Current, 16mm max, Cable Diameter
|Cable Entry: Rear, Bottom or Side
|Enclosure Dimensions: 439 x 282 x 122mm
|Protection Degree: IP65 (Weatherproof)
|Enclosure Material: PC/ASA (Batch dependant)
|Operating Temperature: -25 °C to +40 °C
|Circuit Breaker: 32A Curve B
|Earthing Arrangement: Built-in RCD protection and earth fault detection - no earth rod required
|Charging Profile: 3 Charging Modes: ECO, ECO + and FAST. ECO settings use solar or wind energy intergrated with grid power. In FAST mode Zappi operates like any other mains powered EV charger.
|Connector Type: Type 2 Tethered Cable (6.5m) or Type 2 Socket with Locking System
|Mounting location: Indoor or Outdoor (Permanent Mounting)
- 1 X Zappi Eco-smart Unit Single Phase EV Charge Point 7kW Untethered Black,
- 1 X myEnergi Retrofit Tamper Kit,
- 1 X CT Clamp,
- 1 X Mounting template,
- 1 x Mounting Kit (for a brick wall) including
- 4 X 50mm Pozi screws,
- 4 X Wall mounting plug,
- 4 X Sealing washer
The starkest and most obvious difference between Type 1 and Type 2 EV chargers is the design of the connector. Type 1 EV connectors have a five-pin design, usually taking on a circular design. In comparison, Type 2 EV connectors have seven pins.What is it needed for myEnergi Retrofit Tamper Kit?
The myEnergi Tamper Retrofit Kit to be used with Zappi’s that have an ‘H’ in their model number. If your zappi does not have tamper detection built in you are required to install this kit if the device is being installed in England, Scotland or Wales on or after 30th December 2022, to be compliant with the smart charging regulations.What is Zappi Type 2?
Zappi Type 2 is an EV charger with a difference. Not only does it operate as a traditional EV charger, it can also charge your EV using 100% FREE energy generated from your Solar PV or wind generation. In addition, besides a bit of a facelift, the Zappi Type 2 has a 1 and 3 phase option (with one phase you'll get one CT clamp, with 3 phase you'll get 3).
When weighing the costs of tethered and untethered EV chargers, consider that tethered chargers typically cost more upfront, as the cable is included in the price. Untethered chargers are initially cheaper, but you may need to purchase a charging cable separately, potentially minimising the price difference. However, the Zappi is the same price regardless of being tethered or untethered making it the perfect solution for both uses.Is a tethered EV charger more secure?
Tethered chargers are more secure than untethered chargers due to their permanently attached cable, preventing theft. Untethered chargers’ detachable cables are more susceptible to theft, but many models feature added security measures such as pin protection or cable locking. To keep the cable safe, it’s best to disconnect and store it out of sight when not in use.
The Zappi Type 2 is compatible with all plug-in hybrid and electric vehicles (EVs) that use a Type 1 or Type 2 connector. It also supports a range of charging speeds, from 2.3 kW up to 22 kW, depending on your EV’s capability.
Don't know an answer to your question? Call us on 020 8064 0335 or email email@example.com.