Charge Ahead with Intelligence: Zappi 22kW EV Charger
The Zappi stands as the most intelligent home EV charger globally, offering adaptability that sets it apart. Not only will Zappi charge your car way faster than the device supplied with your car, it will also guarantee that all power used to charge is taken from your solar or wind generation. No PV and/or wind turbine, no problem - Zappi can still operate like an ordinary EV charging station from the grid. You can always add your solar/wind system later.
This 22kW electric car charger (available in black or white) is especially smart as it will enumerate all energy consumed and exported across all three phases! Track your charging performance and schedule sessions effortlessly through the user-friendly smartphone app, ensuring a hassle-free experience. Compatible with any Type 2 electric vehicle, the Zappi is your gateway to efficient and eco-friendly charging.
- Three-phase power: This power can charge electric cars much faster than single-phase power, as it can deliver more power to the car's charging system. This is because the charging system in most electric cars is designed to take advantage of three-phase power, which allows for faster charging times.. However, not all electric cars are equipped to take advantage of three-phase power. Some electric cars are designed to use single-phase power, and these cars will not charge any faster with a three-phase power supply. It's essential to check the specifications of your electric car before choosing a power supply for charging.
- Zappi G range featuring:
- Front Lid Tamper Detection
- Compliant with UK Electric Vehicle (Smart Charge Points) Regulations
- Automatic Firmware Checking
Three Electric Car Charging Modes:
- Eco: Balances green energy and grid power, dynamically adjusting to minimize imported power.
- Eco+: Adapts charge power based on overall home power consumption, pausing when grid power is excessive and resuming during surplus free power availability.
- Fast: Charges the vehicle at maximum power for swift charging.
- Built-in RCD Protection and Grid Sensor(s): Ensures safety with built-in RCD protection against electrical faults. Supplied clip-on grid sensor(s) optimize energy management and provide accurate consumption measurements.
- Zappi App: Pair your Tethered Zappi with the myEnergi Zappi App for remote device access and control worldwide. Set timers on the app for convenient charging during periods with the lowest rates.
3-Year Product Warranty: Zappi Type 2 is backed by a 3-year manufacturer’s warranty, offering peace of mind against defects or malfunctions during regular use.
Prompt Delivery: Explore the cutting-edge features of the Zappi EV Charger with prompt 2-3 working days delivery within the UK (longer to the Highlands, islands, and Northern Ireland).
Elevate your EV charging experience with the intelligence and adaptability of the Zappi, setting new standards in home charging.
|Rated Power: 22kW (3-Phase)
|Rated Supply Voltage: 400V AC 3-Phase (+/- 10%)
|Supply Frequency: 50Hz
|Charging Current: 32Amax
|Standby Power Consumption: 3W
|Integral Protection: 6mA DC residual current protection (RDC-DD in accordance with EN 62955)
Economy Tariff Sense: Input 3.3 – 230Vrms AC Sensing (4.0kV Isolated)
Volt Free Contact (24Vdc Supplied from the Zappi)
|Wireless Interface: 868/915 MHz (Proprietary Protocol) for Wireless Sensor and Remote Monitoring Options
|WiFi Connectivity: 2.4GHz 802.11BGN Connection up to 150 Mbps
|Grid Current Sensor: 100A max. Primary Current, 16mm max, Cable Diameter
|Cable Entry: Rear, Bottom or Side
|Enclosure Dimensions: 439 x 282 x 122mm
|Protection Degree: IP65 (Weatherproof)
|Enclosure Material: PC/ASA (Batch dependant)
|Operating Temperature: -25 °C to +40 °C
|Circuit Breaker: 32A Curve B
|Earthing Arrangement: Built-in RCD protection and earth fault detection - no earth rod required
|Charging Profile: 3 Charging Modes: ECO, ECO + and FAST. ECO settings use solar or wind energy intergrated with grid power. In FAST mode Zappi operates like any other mains powered EV charger.
|Connector Type: Type 2 Tethered Cable (6.5m) or Type 2 Socket with Locking System
|Mounting location: Indoor or Outdoor (Permanent Mounting)
- 1 X Zappi Unit Three Phase EV Charge Point 22kW Tethered Black with 6.5m EV cable and connector attached,
- 1 X Cable wall guard,
- 3 X CT Clamp,
- 1 X Mounting template,
- 1 x Mounting Kit (for a brick wall) including
- 4 X 50mm Pozi screws,
- 4 X Wall mounting plug,
- 4 X Sealing washer
- 4 x 12mm Pozi screws (countersunk)
The starkest and most obvious difference between Type 1 and Type 2 EV chargers is the design of the connector. Type 1 EV connectors have a five-pin design, usually taking on a circular design. In comparison, Type 2 EV connectors have seven pins.What is Zappi Type 2?
Zappi Type 2 is an EV charger with a difference. Not only does it operate as a traditional EV charger, it can also charge your EV using 100% FREE energy generated from your Solar PV or wind generation. In addition, besides a bit of a facelift, the Zappi Type 2 has a 1 and 3 phase option (with one phase you'll get one CT clamp, with 3 phase you'll get 3).What is a 3 phase EV charger?
A 3 phase EV charger is an electric vehicle charging station that uses a three-phase electrical supply to charge EVs faster than a single-phase charger. Three-phase power is common in commercial and industrial settings, and 3 phase EV chargers are ideal for businesses, fleet operators, and public charging stations.How fast can a 3 phase EV charger charge an EV?
The charging speed of a 3 phase EV charger depends on the power output of the charger and the capacity of the EV's battery. Typically, a 22 kW 3 phase EV charger can charge an EV with a 60 kWh battery in about three hours, compared to a 7kW single-phase charger that takes around 9 hours.Do I need a special electrical supply for a 3 phase EV charger?
Yes, 3 phase EV chargers require a three-phase electrical supply, which is not typically found in residential settings. If you are planning to install a 3 phase EV charger at your home, you will need to have a three-phase electrical service installed by a licensed electrician.Can 3 phase EV chargers be used for all types of EVs?
Yes, 3 phase EV chargers can be used to charge all types of EVs, including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs). However, some EVs may not be able to take advantage of the faster charging speed of a 3 phase charger, depending on their on-board charger capacity.Can I get government incentives for installing a 3 phase EV charger?
Yes, in many countries, government incentives are available to businesses and individuals who install EV charging stations, including 3 phase EV chargers. These incentives may include tax credits, rebates, and grants. Be sure to check with your local authorities to find out what incentives are available in your area.
When weighing the costs of tethered and untethered EV chargers, consider that tethered chargers typically cost more upfront, as the cable is included in the price. Untethered chargers are initially cheaper, but you may need to purchase a charging cable separately, potentially minimising the price difference. However, the Zappi is the same price regardless of being tethered or untethered making it the perfect solution for both uses.Is a tethered EV charger more secure?
Tethered chargers are more secure than untethered chargers due to their permanently attached cable, preventing theft. Untethered chargers’ detachable cables are more susceptible to theft, but many models feature added security measures such as pin protection or cable locking. To keep the cable safe, it’s best to disconnect and store it out of sight when not in use.
Don't know an answer to your question? Call us on 020 8064 0335 or email firstname.lastname@example.org.